Deck Mounted Electric Venting Skylight FVE - FAKRO

Premium Deck Mounted Electrically Operated Venting Skylights FVE

FAKRO FVE electric venting skylights, give you the comfort you were looking for. FVE skylights not only let the light in, it also allows active circulation air. Thanks to the technology used to make this product, gives you a peace of mind. Originally equipped with two rain sensors, it automatically closes when it starts to rain. Such feature can help you avoid many unpleasant surprises. If you have enough of light, just block the light with one of the accessories. Do not worry about the insects flying in through the open skylights; they will be stopped by the insect screen that comes with every venting skylight. FVE skylights and extra accessories are hand held, remotely operated for an even easier and more comfortable use.

 

Characteristics:

  • The electric venting skylight FVE gives comfort of use. Remote-operated, the FVE skylight is also equipped with rain sensors, automatically closing in case of rain
  • Low emission heat reflecting double glazing; available in tempered-tempered (G3) or tempered-laminated (G31) version
  • Beautiful, hand selected, vacuum treated, lacquered timber frames
  • Special perimeter gasket underneath the frame for increased insulation
  • Internal gasket system protects frame and drywall from condensation
  • Easy, “bracket free” installation system
  • UV resistant cladding made from polyester paint coated aluminum for long performance
  • Class 3 corrosion resistant hinges
  • Suitable for roof pitches between 15-85°
  • Better sizing improves ability to install and finish drywall without additional support
  • Double seals for better insulation between the sash and frame when skylight is closed
  • Insect screen comes as standard
  • Integrated electric control system

Premium Deck Mounted Electrically Operated Venting Skylights FVE

 

Flashings Accessories

  • FVE G3 Tempered Glass


    • single chamber Solar Factor glazing unit 4HT – Tg16Ar – 4H
    • Highest quality pine woodhighest quality pine wood, glued in layers, vacuum impregnated
    • Wood painted twice with ecological acrylic lacquerdouble coated wood with ecological acrylic lacquer in natural colour
    • suitable for roof pitches 15-85°suitable for roof pitches between 15-85°
    FVE G3
    • 0,18 (1,0) [BTU/h ft2F] (W/m2K) glazing U-value 0,44 (2,50) [BTU/h ft2F] (W/m2K) U-Factor (skylight) 0,21 Solar Heat Gain Coefficient (SHGC) 0,04 [cfm/ft2] @ 1,57 psf, tested size: 24x70 Air Leakage [cfm/ft2] 0,41 Visible Transmittance (VT) 54 Condensation Resistance 730 [Pa] Water Penetration Resistance/Test Pressure 3520/1200 [Pa], tested size: 27x70 Design Pressure (positive/negative)
  • FVE G31 Laminated Glass


    • Single chamber Solar Factor glazing unit 4HT– Tg14Ar – 33.2
    • Highest quality pine woodhighest quality pine wood, glued in layers, vacuum impregnated
    • Wood painted twice with ecological acrylic lacquerdouble coated wood with ecological acrylic lacquer in natural colour
    • suitable for roof pitches 15-85°suitable for roof pitches between 15-85°
    FVE G31
    • 0,19 (1,1) [BTU/h ft2F] (W/m2K) glazing U-value 0,44 (2,50) [BTU/h ft2F] (W/m2K) U-Factor (skylight) 0,21 Solar Heat Gain Coefficient (SHGC) 0,04 [cfm/ft2] @ 1,57 psf, tested size: 24x70 Air Leakage [cfm/ft2] 0,39 Visible Transmittance (VT) 53 Condensation Resistance 730 [Pa] Water Penetration Resistance/Test Pressure

Where to buy? Contact our Distributor Catalogs and Brochures 

FVE sizes

FVE   301R 304R 306R 308R 312R
Rough Opening (w x h) inches 21  x 27⅛ 21 x 38⅛   21 x 46 21 x 54¾ 21 x 70½
Outside Frame   23⅛ x 28 23⅛ x 39  23⅛ x 46⅞ 23⅛ x 55½ 23⅛ x 71⅜
Daylight area (glass) sq ft. 2.37 3.64 4.54 5.54 7.37
FVE   504R 506R 508R 801R 806R
Rough Opening (w x h) inches 30 x 38⅛   30 x 46 30 x 54¾ 44 x 27⅛    44 x 46
Outside Frame   32⅛ x 39 32⅛ x 46⅞ 32⅛ x 55½ 46¼ x 28 46¼ x 46⅞
Daylight area (glass) sq ft. 5.62 7.03 8.57 5.68 10.91

 

Recommended product

THERMO high profile flashing

NEW EH-AT and EHA-AT THERMO high profile flashing

The purpose of insulated flashing is reduce thermal bridges and better insulate the skylight frame and roof decking. 

THERMO flashing increases the skylight's insulated value by up to 10%*!

*versus regular EH-A flashing

Gallery

Instructions