Deck Mounted Fixed Skylights FX - FAKRO

Premium Deck Mounted Fixed Skylights FX

Qualify for an $80 REBATE for each FAKRO FX skylight retrofit. Details available at www.uniongas.com/homereno.

 

Characteristics:

  • The main purpose of the fixed skylight is to take advantage of natural light. Natural light in homes increases the comfort of living and positively influences health. A simple design guarantees hassle free use, particularly important in high-ceiling installations
  • Low emission heat reflecting double glazing; available in tempered-tempered (G3) or tempered-laminated (G31) version
  • Beautiful, hand selected, vacuum treated, lacquered timber frames
  • Special perimeter gasket underneath the frame for increased insulation
  • Internal gasket system protects frame and drywall from condensation
  • Easy, “bracket free installation system”
  • UV resistant cladding coated for longer resistance with polyester
  • Suitable for roof pitches between 15-85°
  • Better sizing improves ability to install and finish drywall without additional support
  • For use with EL step flashing, EH high-profile flashing or Insulated flashings EL-T THERMO and EH-T THERMO

Premium Deck Mounted Fixed Skylights FX

 

Flashings Accessories

  • FX G3 Tempered Glass


    • single chamber Solar Factor glazing unit 4HT – Tg16Ar – 4H
    • Highest quality pine woodbeautiful, hand selected, vacuum treated, lacquered timber frames
    • Wood painted twice with ecological acrylic lacquerdouble coated wood with ecological acrylic lacquer in natural colour
    • suitable for roof pitches 15-85°suitable for roof pitches between 15-85°
    FX G3
    • 0.18 (1.0) [BTU/h ft2F] (W/m2K) glazing U-value 0.39 [BTU/h ft2F] U-Factor (skylight) 0.21 Solar Heat Gain Coefficient (SHGC) 0.3 [cfm/ft2] @ 1.57 psf, tested size: 24x70 Air Leakage [cfm/ft2] 0.41 Visible Transmittance (VT) 54 Condensation Resistance 730 [Pa] Water Penetration Resistance/Test Pressure 3520/3360 [Pa], tested size: 27x70 Design Pressure (positive/negative)
  • FX G31 Laminated Glass


    • single chamber Solar Factor glazing unit 4HT– Tg14Ar – 33.2
    • Highest quality pine woodbeautiful, hand selected, vacuum treated, lacquered timber frames
    • Wood painted twice with ecological acrylic lacquerdouble coated wood with ecological acrylic lacquer in natural colour
    • suitable for roof pitches 15-85°suitable for roof pitches between 15-85°
    FX G31
    • 0.19 (1.1) [BTU/h ft2F] (W/m2K) glazing U-value 0.39 [BTU/h ft2F] U-Factor (skylight) 0.21 Solar Heat Gain Coefficient (SHGC) 0.3 [cfm/ft2] @ 1.57 psf, tested size: 24x70 Air Leakage [cfm/ft2] 0.40 Visible Transmittance (VT) 54 Condensation Resistance 730 [Pa] Water Penetration Resistance/Test Pressure

FX sizes

FX   106R 301R 304R 306R 308R 312R
Rough Opening (w x h) inches 14½ x 46 21 x 27⅛ 21 x 38⅛ 21 x 46 21 x 54¾ 21 x 70½
Outside frame   16⅞ x 46⅞ 23⅛ x 28 23⅛ x 39 23⅛ x 46⅞ 23⅛ x 55½ 23⅛ x 71⅜
Daylight area (glass) sq ft. 3.46 2.92 4.31 5.30 6.39 8.39
FX   504R 506R 508R 801R 806R
Rough Opening (w x h) inches 30 x 38⅛ 30 x 46 30 x 54¾ 44 x 27⅛ 44 x 46
Outside frame   32⅛ x 39 32⅛ x 46⅞ 32⅛ x 55½ 46¼ x 28 46¼ x 46⅞
Daylight area (glass) sq ft. 6.46 7.94 9.58 6.67 12.09

 

Where to buy? Contact our Distributor Catalogs and Brochures 

Recommended product

THERMO high profile flashing

NEW EH-AT and EHA-AT THERMO high profile flashing

The purpose of insulated flashing is reduce thermal bridges and better insulate the skylight frame and roof decking. 

THERMO flashing increases the skylight's insulated value by up to 10%*!

*versus regular EH-A flashing

Instructions